The mountain saw is small and flexible, easy to move, and has large functions. It is suitable for small-scale efficient mining of stone and small blocks in large-scale mines. It can be widely used in tuff, granite, and marble mines. Today I will talk about it with you. Use advantage 

The accessories of the mountain sawing machine can be directly sawed in the rock of the ore body, with a yield of more than 90%, while the traditional quarrying method uses thermal cutting combined with explosive blasting, the yield is only 30%-50%, and the quality of the mined stone is high. , The stone sawing machine does not need blasting, the stone material is not damaged by vibration, and the overall quality of the stone material is greatly improved. Less pollution, the mining quarry adopts wet operation, and the water flow is sprayed from the edge of the sawing board of the stone sawing machine and directly to the saw disc and the stone, such as cutting tofu with a quick knife, the stone is not broken, and there is less gravel, less dust, and no smoke. 

1. The operation of the stone sawing machine should be balanced and the vibration should be small. The repeated impact of the diamond machine saw blade due to vibration will cause damage to the diamond cutter head, gyroscope or abnormal wear. Therefore, the fastening of each connection part of the mechanical equipment and the fixability of the block clamping are very important. For this reason, we should strive to reduce the vibration during sawing to ensure the normal and stable operation of the equipment. 

2. The accuracy and wear resistance of the cutter shaft, the cutter shaft is the benchmark for installing the saw blade, and its accuracy generally determines the installation accuracy of the saw blade. When the saw blade is installed and removed, the repeated friction of the saw blade pushing and pulling on the shaft can easily cause wear or scratch damage to the blade shaft, especially after the equipment has been used for a long time. Therefore, to ensure that the accuracy of the tool shaft will not change greatly, in addition to the necessary inspection and adjustment of the installation accuracy of the tool shaft, the material selection, heat treatment and surface treatment of the tool shaft are also very important. 

It has the following advantages: 

1. The machine has compact structure, high degree of automation, simple operation and convenient use. 

2. The saw blade of the machine can be raised and lowered automatically, running freely and with a higher safety factor. 

3. It can process large-sized rock blocks and improve the yield. 

4. With unique design and large chassis, the structure of the whole machine is more stable and the service life is longer